
AAC Lightweight Block G2
G2 AAC lightweight blocks, class 2 to TIS 1505, about 400-500 kg/m³. Lighter and better at keeping heat out than G4, for non-load-bearing walls in column-and-beam houses and townhomes. 7-25 cm from Q-CON Extra Cool, Diamond and DURA One.
What are G2 AAC blocks?
G2 AAC blocks are class 2 blocks under TIS 1505-2541, with a dry density of about 400-500 kg/m³. That is lower than G4, so the blocks are lighter, hold more air and insulate better against heat. Compressive strength is 20 kg/cm² or more, which is enough for non-load-bearing walls in a column-and-beam frame.
Applications and brands
- Interior and exterior walls of houses, townhomes and small commercial buildings.
- Q-CON G2 Extra Cool, 7.5-25 cm, in A-grade and B-grade, available by the full truck.
- Diamond G2, 7-25 cm; 7, 7.5 and 10 cm are stocked, other thicknesses are made to order.
- DURA One G2, 7.5 and 10 cm.
Benefits of G2 AAC blocks
The low weight reduces structural load and speeds up handling and laying, and exterior walls keep the house cooler. For condos, high-rise or walls that must carry heavy fixings, choose G4 AAC blocks instead. The table compares the two grades.
G2 (class 2) | G4 (class 4) | |
|---|---|---|
Dry density | About 400-500 kg/m³ | About 500-700 kg/m³ |
Compressive strength | 20 kg/cm² or more | 40 kg/cm² or more |
Strength | Lighter, better heat insulation | Stronger, better for heavy fixings |
Best for | Non-load-bearing walls, houses, townhomes | Condos, high-rise, engineered walls |
Brands | Q-CON Extra Cool, Diamond, DURA One | Q-CON, THAICON, TPI, Aerocrete, Smart Block |
Buy G2 AAC blocks at OneStockHome
At OneStockHome you can compare every G2 thickness and brand on one page and order by the block or by the full 6-wheel or trailer truck at a lower per-block price, with delivery charged by weight. Add AAC masonry mortar and AAC plaster to the same order. Further reading: G2 vs G4 AAC blocks


















