Weber.tai 2-in-1

Product Benefits of Weber.tai 2-in-1

• 2-in-1 property for tiling and preventing water
• Good for laying large size tiles, granito tiles,granites, and marbles
• Excellent bonding
• Laying tiles on internal existing tiles
• Low VOCs

KEY BENEFITS of Weber.tai 2-in-1

• First and only innovation in Thailand. Two-in one which can be used for tiling and to prevent water
• Ideal for tile-it-yourself in wet areas of your house. e.g. bathrooms and kitchens
• Very good bonding strength
• Suitable for any kind and sizes of tiles
• Tiles can be adjustable for long period due to longer open time
• Loner pot life allows the mixture standing longer for use (keep away from heat and sunlight )
• Tiles are adjustable within 15 minutes
• Tiles floor can open for foot traffic after 24 hours

TECHNICAL DATA of Weber.tai 2-in-1

• Density of powder : 1.35 g/cm3
• Chemical curing time : 3 - 4 minutes
• Pot life (in shade) : 4 hours
• Open time : 20-30 minutes
• Adjusting time : 15 minutes
• Recommended thickness : 2 - 10 mm
• Waiting time before grouting : 24 hours
  • Remark: These test results are from laboratory test. They could be slightly different from on-site results because of the differences in applications and conditions.

LIMIT OF USE of Weber.tai 2-in-1

• Not suitable to be used externally (instead use weber.dry tex waterproofing motar before using weber.tai flex).
• Not suitable to be used on wood, cement-fiber board, gypsum plaster, painted surfaces (instead use weber.dry top waterproofing slurry before using weber.tai flex).
• Not suitable to be used on metal and plastic substrates (instead use weber.color poxy as the adhesive and weber.color poxy as the grout).
• Not recommended to use in swimming pool or any areas, where proper waterproof layer is required (instead use weber.dry tex waterproofing motar before using weber.tai gres).

CERTIFIED STANDARD of Weber.tai 2-in-1

International/European standard

• Initial tensile adhesion strengthISO 13007 part 2-4.4.4.2 or EN 1348-8.2
  • Standard ≥ 1.0 N/mm2 l Result 1.70 N/mm2
• Tensile adhesion strength after water immersion ISO 13007 part 2-4.4.4.3 or EN 1348-8.3
  • Standard ≥1.0 N/mm2 l Result 1.10 N/mm2

American Standard

• Shear strength to glazed wall tiles at 28 days according to ANSI 118.4 - 1999: F - 5.1.5
  • Standard ≥ 20.9 kg/cm2 l Result 22.1 kg/cm2
• Shear strength to impervious ceramic mosaic tiles at 28 days according to ANSI 118.4 - 1999: F - 5.2.4
  • Standard ≥14.0 kg/cm2 l Result 35.8 kg/cm2
• Shear strength to quarry tiles at 28 days according to ANSI 118.4 - 1999: F - 5.3.3
  • Standard ≥ 10.5 kg/cm2 l Result 17.5 kg/cm2