Weber.tai Gres

Product Benefits Weber.tai Gres

• Excellent bonding strength
• Laying swimming pool tiles
• Good for laying large size tiles from 60 x 60 cm like granito tiles, granites, and marbles
• Laying tiles on internal existing tiles
• Low VOCs

KEY BENEFITS of Weber.tai Gres

• Excellent bonding strength 
• Can be used on cement-based substrates or tiled in swimming pools onto interior existing tiles
• Tiles can be adjusted for long period due to longer open time
• Longer pot life allows mixture standing longer for use (keep away from heat and sunlight)
• Tiles are adjustable within 15 minutes
• Tiled floor can open for foot traffic after 24 hours

TECHNICAL DATA of Weber.tai Gres

• Density of powder : 1.4 g/cm3
• Chemical curing time : 3 - 4 minutes
• Pot life (in shade) : 4 hours
• Open time : 20-30 minutes
• Adjusting time : 15 minutes
• Recommended thickness : 2 - 10 mm
• Waiting time before grouting : 24 hours
  • Remark: These test results are from laboratory test. They could be slightly different from on-site results because of the differences in applications and conditions.

LIMIT OF USE of Weber.tai Gres

• Not suitable to use on exterior walls when;    
  • size of tiles bigger than 900 cm2 when tiling higher than 28 m. (instead use weber.tai flex).    
  • size of tiles between 900 to 1,600 cm2 when tiling higher than 8 m (instead use weber.tai flex).
• Not suitable to use on glazing substrates, woods and painted surfaces (instead apply weber.prim 2 primer before using weber.tai flex).
• Not suitable to use on light-weight concrete without cement render (instead use weber.tai maxx).
• Not suitable to use on gypsump plaster board (instead use weber.tai flex or weber.fix plus(for humid area) or weber.fix pro(for general use)).
• Not suitable to use with metal and plastic substrates (instead use weber.color poxy).

CERTIFIED STANDARD of Weber.tai Gres

International/European standard 

• Initial tensile adhesion strength ISO 13007 part 2-4.4.4.2 or EN 1348-8.2
  • Standard ≥1.0 N/mm2 Result 2.06 N/mm2
• Tensile adhesion strength after water immersion ISO 13007 part 2-4.4.4.3 or EN 1348-8.3
  • Standard ≥1.0 N/mm2 Result 1.60 N/mm2
• Open time tensile adhesion strength ISO 13007 part 2-4.1 or EN 1346
  • Standard ≥0.5 N/mm2 Result 0.83 N/mm2